Calomax Quantum User Manual Page 8

  • Download
  • Add to my manuals
  • Print
  • Page
    / 24
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 7
Page 8
hold a cup below the dispense valve or place large vessels on the
drip tray. Care must be taken to avoid injury through splashing or
over-filling.
To begin filling, enable the dispense valve by turning on the key
switch (button will illuminate). Pressing the dispense button will
allow water to flow from the valve.
To stop filling, release the dispense button.
NEVER PASS YOUR HAND BENEATH THE NOZZLE.
Please retain these instructions for future reference
Ensure that a suitable drip tray is positioned below the dispense
valve. This will help keep the surrounding work surfaces and floor
free from drips or splashes. Various options are available and are
outlined on the Accessories page of this booklet.
All de-scaling and servicing must be performed by a suitably
qualified engineer.
GENERAL NOTES
GENERAL OPERATION
adhered to. This is to prevent health and safety issues, taste problems
and potential damage to the appliance. Misuse of such chemicals is not
covered by the product warranty.
The Quantum-e boiler benefits from an integral scale inhibitor, this is not
a scale eliminator and its effects will differ according to the water quality
in your area. To ensure trouble free operation, periodically check for
scale inside the boiling chamber. The production of scale is a natural
phenomenon and some de-scaling may be required within the first 12
months. This is not covered under the products warranty as it is not a
fault. If the water supply contains excessive solids in suspension it is
recommended that a fine mesh “in line” water filter is fitted in the pipe
work after the stop cock.
CLEANING
Avoid using any abrasive materials. Wiping the outer casing
with a damp cloth should be sufficient. Some stainless steel
cleaning products may not be suitable for plastic and must not
come in contact with the plastic fascia. Always disconnect the
electrical supply before cleaning.
NEVER USE A SPRAY JET OR ANY OTHER METHOD WHICH COULD
CAUSE WATER TO ENTER THE ELECTRICAL CHAMBER.
Page view 7
1 2 3 4 5 6 7 8 9 10 11 12 13 ... 23 24

Comments to this Manuals

No comments